HS6057
Designed to drive down water, electrical and gas costs while improving productivity, HS-Series High-Performance Washer-Extractors deliver high-speed extract, an easy-to-install freestanding design, unmatched durabilty and the ultimate in programmability! HS-Series commercial washers deliver more performance using less labor, natural resources and chemicals. The HS-Series front-load washer is available in 130-, 190- & 255-pound capacity models.
| PRODUCT SPECS - STAT | |
| Capacity lbs | 130 |
| Cylinder Diameter inch | 42.5 |
| Cylinder Depth inch | 24.4 |
| Cylinder Volume cu ft | 20.1 |
| Net Weight lbs | 4260 |
| Crated Weight lbs | 4636 |
| Machine Dimensions inch WxDxH | 61.8 x 58.8 x 75.8 |
| Door Opening inch | 22 |
| Floor to Door inch | 32 |
| Shipping Dimensions inch WxDxH | 66.5 x 64.8 x 85 |
| Washing Speed rpm | 13/18/24/30/36 |
| Spin Speeds rpm | 72/300/450/625/800 |
| G-force | 3.13/54/122/236/387 |
| Static Force Transmitted lbs | 4888 |
| Dynamic Force Transmitted lbs | 692 |
| Frequency of Dynamic Force Hz | 13.3 |
| Available Voltages/Wire Conductor/Amp | |
| Hot Water (standard) Hot Water (standard) Electric Auxiliary Heat (optional) Electric Auxiliary Heat (optional) Steam Auxiliary Heat (optional) Steam Auxiliary Heat (optional) | 208-240/60/3, 3W+G, 25440-480/60/3, 3W+G, 16208/60/3, 3W+G, 100240/60/3, 3W+G, 125208-240/60/3, 3W+G, 25440-480/60/3, 3W+G, 16 |
| Drain Diameter inch | 3 |
| Water Inlets inch | 2 @ 1 |
| Recommended Water Pressure PSI | 30-60 |
| Water Flow gal/min | 26 |
| Steam Connection inch | 3/4 |
| Steam Pressure (optional) PSI | 29-87 |
| Steam Flow (optional) lbs/h | 397 |
| Total Power kW | 7.3 |
| Electrical Heating Power (optional) kW 208/60/3 240/60/3 | 27.935.8 |
| PRODUCT SPECS - TILT | |
| Capacity lbs | 130 |
| Cylinder Diameter inch | 42.5 |
| Cylinder Depth inch | 24.4 |
| Cylinder Volume cu ft | 20.1 |
| Net Weight lbs | 4965 |
| Crated Weight lbs | 5549 |
| Crated Weight-Tilt Assembly lbs | 913 |
| Machine Dimensions inch WxDxH | 65 x 63.5 x 83.3 |
| Door Opening inch | 22 |
| Floor to Door inch | 39.4 |
| Shipping Dimensions inch WxDxH | 66.5 x 64.8 x 85 |
| Shipping Dimensions-Tilt Assembly WxDxH inch | 42.5 x 78 x 27.6 |
| Washing Speed rpm | 13/18/24/30/36 |
| Spin Speeds rpm | 72/300/450/625/800 |
| G-force | 3.13/54/122/236/387 |
| Static Force Transmitted lbs | 5594 |
| Dynamic Force Transmitted lbs | 692 |
| Frequency of Dynamic Force Hz | 13.3 |
| Available Voltages/Wire Conductor/Amp | |
| Hot Water (standard) Hot Water (standard) Electric Auxiliary Heat (optional) Electric Auxiliary Heat (optional) Steam Auxiliary Heat (optional) Steam Auxiliary Heat (optional) | 208-240/60/3, 3W+G, 25440-480/60/3, 3W+G, 16208/60/3, 3W+G, 100240/60/3, 3W+G, 125208-240/60/3, 3W+G, 25440-480/60/3, 3W+G, 16 |
| Drain Diameter inch | 3 |
| Water Inlets inch | 2 @ 1 |
| Recommended Water Pressure PSI | 30-60 |
| Water Flow gal/min | 26 |
| Steam Connection inch | 3/4 |
| Steam Pressure (optional) PSI | 29-87 |
| Steam Flow (optional) lbs/h | 397 |
| Total Power kW | 7.3 |
| Electrical Heating Power (optional) kW 208/60/3 240/60/3 | 27.935.8 |
| Compressed Air Connection inch | 3/8 |
| Compressed Air Pressure PSI | 87-100 |
| Compressed Air Flow cfm | 7 |
Three Convenient Laundry Center Ownership and Leasing Programs
AAdvantage provides three convenient ways to acquire new equipment. One for every budget.
LEASE
- NO Capital Outlay
- LOWER Water & Utility Bills
- LOW Monthly Rental Rates
- TAX Incentives
- Includes all Service and Parts
- SUPERIOR Service
BUY
- FLEXIBLE Financing
- SUPERIOR Service & Maintenance Plans Available
- YOU Keep 100% Of Revenue
- EQUIPMENT Cost Includes Installation
- Free AAdvantage Consultation
- The BEST Equipment to Choose From
LEASE
- NO Capital Outlay
- FRIENDLY Lease Terms
- LOWER Water & Utility Bills
- INCREASED ROI
- IMPROVED Resident Satisfaction
- SUPERIOR Service